Menu

A tire inner tube is an inflatable ring that forms the interior of some pneumatic tires. The tube is inflated with a valve stem, and fits inside of the casing of the tire. The inflated inner tube provides structural support and suspension, while the outer tire provides grip and protects the more fragile tube. They are widely used in bicycles and are also used in many motorcycles and heavy road vehicles such as trucks and buses. They are now less common in other wheeled vehicles because of the benefits of having no tube, such as the ability to operate at low pressure and at high pressure (unlike a tube tire, which would pinch at low pressure and burst at high pressure), without going flat. Large inner rings also make effective flotation devices and are widely used in the leisure activity of tubing.

Truck tube is the tube designed for truck. The truck tube provides cooler running for long haul, high speed service. It helps provide longer tread wear, allowing for a higher TMPH rating for improved overall performance. And it helps provide traction both forward and backward.
Car tube is the tube designed for car. Tube is a circular and ring-like part of a vehicle which comes in contact with ground. Tubes are fitted on rims and are filled with compressed air. Since their invention, natural rubber is the most widely used material in manufacturing of tubes.
OTR tubes are the short name of off the road tube. OTR tube mainly used for the giant truck vehicles in mine area. Aggressive tread pattern offers long even tread wear, a cooler running design and improved traction, which is specifically designed for high speed service. The radial construction also allows for a softer ride, improved treadwear and better fuel economy.
A bicycle tube is a unit designed as a bicycle accessory. It is usually made from durable rubber materials such as butyl rubber compound for enhanced durability and the highest level of strength known to man. These bike tubes help protect your tires from getting flat or developing punctures.
Motorcycle tubes are manufactured from natural rubber and are fitted with a centrally position straight metal valve.
The tire flap is an integral part of a tube type truck tire and protects the tube from chafing, heat, and protrusion from the valve hole. Rex-Hide became the only independent producer of truck tire flaps in the United States and at the time marketed its product strictly to tire manufacturers.
Snow tubes are basically oversized inner tubes with a round cut-out section in the center. They are often referred to as "donuts" because of their shape. Rather than lying down as you would on some sleds, you sit across the top of the tube, holding onto the handles on either side for support, and zip down the slope.

Freeze dried products are food goes through a water removal process typically used to preserve perishable materials, with the goal of extending their shelf life and/or preparing them for transport. Freeze-dried products are typically crisper and have rehydration ratios four to six times higher than conventional air-dried foods. Other key benefits of freeze-drying include the high recovery of volatiles, retention of structure and surface area, high yield, long shelf life, and reduced weight for storage, shipping, and handling.
Freeze dried corn is a kind of healthy snack that’s cooked first using normal cooking methods and then seasoned, freeze-dried in the lyophilization machine to remove moisture for special tastes, long storage, easy transportation, etc. Freeze-dried corn has a rich corn fragrance, and it tastes crisp and crunchy thus being loved by many foodies.
Agaricus bisporus is among the most popular edible mushrooms in the world. It comes in various shapes and sizes, including button mushrooms, white mushrooms, crimini, and portabella mushrooms. Agaricus bisporus are popular and valuable foods, which are low in calories but higher in minerals, protein, and fiber. Freeze-dried agaricus bisporus have received much attention for their good sensory quality and high level of nutrient retention.
Freeze-dried mung beans contain about 60% carbohydrate and are rich in protein, fat, vitamins, and minerals. Mung beans not only have good nutritional value but also show hypolipidemic, cholesterol-lowering, antiallergy, antibacterial, and antitumor effects. The freeze-dried mung beans can be used to make products including mung bean cake, mung bean noodles, mung bean wine, mung bean paste, and mung bean flour.
Freeze-dried white cauliflower adopts freeze-drying technology, which well retains the original nutrients and taste, and is easy to store and has a long shelf life. Freeze-dried white cauliflower is not only used in the catering industry, but also often used as pet snacks.
Freeze dried green beans are crunchy, tasty, and fun to eat. This product is also Non-GMO, with no preservatives or additives. The freeze dried green beans retain up to 94% of its ‘fresh’ nutritional value, and are a delightful addition to any recipe, for your morning salad, quiche, brunch additive, or a snack option for an on-the-go man, woman or child. The freeze dried green beans are high quality, freeze dried by reputable food manufacturers. They are also kosher, and packaged carefully by hand for optimum quality, care, and freshness.

A steering damper is found on the front steering linkage of a vehicle. Typically used on four-wheel-drive trucks, the steering damper resembles a shock absorber and is mounted horizontally from the tie rod to the vehicle's frame or chassis. Intended to eliminate much of the steering vibration and wandering characteristics of oversized tires, dampers may be used in pairs or in multiple numbers in extreme cases or on vehicles with very large tires. A steering damper can also be found on vehicles other than trucks, including motorcycles, outboard boat motors, and automobiles.
This belt adjuster damper is designed to match the fit and function of the damper for specified applications. Made of quality materials, it is engineered for reliable performance and durability. It's a reliable replacement for an original part that has failed due to fatigue or corrosion. This part is made from quality materials to ensure reliable performance and long service life.
In their simplest form, big spring seat shocks help to control the impact and rebound movement of your seat springs and suspension. Along with smoothening out bumps and vibrations, the key role of the shock absorber is to ensure that the seat remains in contact with the surface at all times, which ensures the safest seating.
Like struts, a small spring seat shock is a suspension unit and damping device in a single unit. Unlike struts however, they are not designed to be subject to high side loads. Built using similar components to conventional shock absorbers, spring seat shocks are also sealed requiring full replacement.
A twin-tube-shock absorber consists of an inner and outer cylinder. The inner cylinder contains oil and the piston rod is connected to the piston valve. Whereas the outer cylinder acts as a reservoir and has a low-pressure gas. One of the advantages of a twin-tube gas-pressurized shock is that less gas pressure can be used to prevent the fluid from foaming. It also allows more latitude in shock valving for a wider range of control compared to a conventional shock or strut.

Baby shoes are an outer covering for the baby foot typically having a thick or stiff sole with an attached heel and an upper part of lighter material, usually cotton. Soft rubber studs and sensory cushioning under the outsole keep your child from slipping. The soft sole helps little ones learn balance. Avoid bumping the toe cap to add an extra barrier to protect your baby's feet from injury. Baby shoes help the baby's feet flex correctly and ensure natural movement.
Baby moccasin is a soft leather slipper or shoe, strictly one without a separate heel, having the sole turned up on all sides and sewn to the upper in a simple gathered seam. It is elastic at the opening making the shoes easy to put on, easy to take off. And most importantly, they stay on your child's foot. Baby moccasins are made with high quality, durable, wear-tested leather and are suitable for infants and toddlers alike. These moccasins come in a variety of styles and colors so each babe can find their perfect pair.
Baby boots are a fitted covering (as of leather or rubber) for the foot that usually reaches above the ankle. They are lightweight so when the baby walks wearing shoes like walking barefoot. The boots are soft and smooth. And also, the baby boots are elastic at the opening, thus, it's easy to put on or take off the shoes.
Baby sandals are light shoes with either an openwork upper or straps attaching the sole to the foot. They are convenient and comfortable wherever he goes. What's more, they are easy to put on or take off. These comfortable molded footbed sandals are designed for everyday all-day comfort. The sandals are ideal for spring and summer picnics, parties, and playdates. In addition, they are easy to care and clean.

Closet is a tall cupboard or wardrobe with a door, used for storage. The closet has a stable and practical structure. Far from the floor, it pervents moisture and dust effectively. It's easier to clean. It provides you large storage space for your longer outfits and folded clothes. And you can put books, decorations or any small items. And also, the cover of the closet is dustproof and waterproof.
A utility closet is typically used to store cleaning supplies and may also have a spot for a small selection of tools for minor household repairs, like a screwdriver and a wrench, along with emergency supplies, like a flashlight, for a power outage.
An armoire is a bigger piece of furniture, and it is more ornate than a wardrobe. Moreover, armoires typically have shelves along with hanging rails. Armoire is a large two-door cupboard, usually movable and containing shelves, hanging space, and sometimes drawers. It was originally used for storing arms.
The armoire furniture is a piece of large two-door cupboard with garment rod and the drawers. The furniture has passed the test for safety and stability to help reduce tip-over accidents. The garment rod behind doors are for hanging clothes, keeping the wrinkles away. The drawer with metal runners and safety stops keep you and your family safe.
Stackable shoe storage is amazing for dust freedom and maximizing storage space. The clear front door let you find shoes immediately without opening, easily open grab and go. Shoe boxes can be a big help in organizing your shoes neatly. You can put shoes such as heels, flats, sneakers, flip flops, sandals, wedges and more in the shoe storage. The shoe organizer is made of durable shatter-resistant materials. Large ventilation holes ensure air circulation and odor prevention. Breathable shoe containers stay fresh. And it's easy for daily care, and you can clean with mild soap and water.
A shoe rack is a piece of furniture that holds your shoes in a way that will organize and display your shoes as well as keeping them safe from harm. It's a good choice for people who have nowhere else to store shoes and would like somewhere to keep them where they look attractive and are not cluttering up the home.
Coat closet is a closet for storing outerwear wardrobe, closet, dress. It's a tall piece of furniture that provides storage space for clothes. The closet has a door and rails or hooks for hanging clothes.
A wardrobe is a type of cabinet used to store clothes, and can store large clothes such as coats and trousers that are easily folded. Divided into wall and movable, the latter may be equipped with wheels for easy movement. The wardrobe consists of a cabinet body and one or two door panels, and beams are set in the cabinet to facilitate hanging clothes, skirts and trousers. The wardrobe can be divided into open type and sliding door type according to the way of opening the door. Most of the wardrobes are made of wood, some are made of precious mahogany, and some are made of relatively cheap plywood.
Unlike the more traditional wardrobes, portable wardrobes are extremely lightweight, making them easy to move around the house. They are fuss-free and convenient, often assembled and disassembled in just a matter of minutes. Most Singaporeans choose to use these wardrobes as a flexible storage option.
Corner wardrobes are a popular choice of furniture for bedrooms and other spaces. They offer a clever way to maximise the space in a room by utilising corners that you may not have been aware of before. These wardrobes give you the chance to store clothes, shoes, and other items that would otherwise get in the way of your room.

7.5kw belt-free turbine blower is a non-positive displacement, high volume, high pressure, blower that can operate as either a compressor or a vaccum pump. It is also knows as other names such as regenerative blower, vortex blower and side channel blower. All of the names describe the basic principle of operation of the turbine blower. The blower consist of a strong impeller mounted directly on a motor shaft and is rotated at very high speed of about 2900 R.P.M. On the periphery of the impeller is large number of radial blades. The impeller is positioned between two end plates and with the blades located with a channel on either side.
High speed centrifugal blower, as the name suggests, high speed, fast. It is also called high speed turbo blower. Under the design conditions, the air pressure of the high speed centrifugal blower reaches 50-290 mbar, the air volume is 85-6000 cubic meters per hour, the rotating speed is 18000-21000 rpm, and the air volume is three times that of the ordinary high-pressure blower. Therefore, it is also named high-speed blower, and the use effect is more than 95%. High speed centrifugal blower is also called: High-speed fan, High-speed blower, turbine type high-speed blower, super fan, high-speed centrifugal fan, etc., but it is generally called high-speed centrifugal fan in foreign countries, because the fan uses the centrifugal principle to generate rotating mechanical energy and convert it into aerodynamic force with a certain pressure. The English name is mostly centrifugal blower.
Side channel blowers are of use to any process that requires a high volume low pressure delivery system for air or gasses. Here is a list of common use cases including air knives, dry tunnel blowing, process cooling, air cushions, packaging processes, vacuum cutting tables, vacuum cleaners, vacuum cleaning systems, industrial fume/heat extraction, aeration, blowers for swimming pools.
Air knives, including strip air knives and ring air knives, are a kind of equipment specially designed to blow out strong and high-speed airflow to remove dust, blow water stains, and cool down. There is also an air knife for cutting boards. The air knife consists of high-intensity, uniform laminar airflow.
Stainless steel adjustable air knives have the greatest advantage which is that going through an adjustable outlet the airflow can be more stable and stronger. Stainless steel air knives are featured by high precision, strong hardness, high pressure-resistance, and great temperature-resistance. The air knives are widely used in all kinds of blowing off system and air knives drying system. They are also widely applied for ultrasonic cleaning, glass cleaning machines, and dehydration and drying of a circuit board, electroplate, film, coating, non-ferrous metal board/wire/sheet, and other related materials and industries. Moreover, they are also utilized in the barrierless isolation of harmful gases, dust, hot and cold air, drying after printing, heating, and thawing of food and medicine, and high-temperature sterilization.
The greatest advantage of spider nozzle air knives is that they can flex to any position around the bottle to accommodate specific drying needs. Spider air knife has been through many tests and trials. Its innovative design, not only improves the drying efficiency of the bottling and canning production line, but also reduces energy usage by as much as 80% compared with traditional air knives. Moreover, spider air knives also solve the following problems that occurred on the traditional bottling and canning production lines–two air knives usually head to head blow air, which offsets the airflow and even makes a “drying blind” zone.
A belt-free centrifugal blower is an air moving device that uses an impeller to pull air into a tube like structure and release it at a 90o angle. The impeller is a set of blades inside the blower that rotates at a high rate to pressurize and move air. The structure of a centrifugal blower does not require housing for protection, but those with housing are the most common.
The double-stage single phase side channel blower are conceived to suck or to compress gas and non-explosive mixtures. The absence of lubricants guarantees that no oils are present in the compressed fluids. The blowers are equipped with single-phase motors and IE3 high efficiency three-phase motors. The main advantages of double-stage blowers are no maintenance, no contamination of conveyed fluids, silent operation, small size and weight, easy of installation, stability and absence of vibrations. The blowers are mainly applied in fields including air and gas conveyance on machines and plants requiring high suction and delivery pressures, max. operational safety and low noise levels.
Bare shaft side channel blowers are very widely used, that is, the airflow in the same direction as the axis of the fan blades, such as electric fans, air conditioner outdoor fans are axial flow fans. The blowers are usually used in applications with high flow requirements and low pressure requirements. The blower fixes the position and move the air. The bare shaft side channel blowers are mainly composed of the fan impeller and the casing. The structure is simple but the data requirements are very high.
There are many blower accessories including press relief valve oil sight gauge, blower lube, bearings and seals, blower bolt kit and alum blower

Copper braided wire is used for soft connecting wires of electrical devices, switch electrical, electric furnaces and batteries. The copper braided wire is made of high-quality round copper wire or tinned soft round copper wire braided by multiple strands in a single layer or multiple layers.
Tinned copper braid is a type of multiconductor cable that is a tight weave of soft drawn tinned copper wire. Tinned copper braid will give you more flexibility, because of its considerably lighter cable from an installation point of view. In addition, since the material has been made of copper, it allows the armored to be used as ground cable when it’s necessary.
Copper stranded wire is made of a quantity of thin (usually copper) strands that are twisted and bundled together and generally enclosed in a PVC material to form a multi-stranded conductor. Stranded wires are mainly used for indoor applications.
Copper flexible connectors provide a low resistance flex connector between two rigid bus bar sections that have dynamic motion. Flexible connectors are widely used in electrical distribution, switchgear industries because of excellent flexibility.
Bare copper wire is the most commonly used type of copper wire and is often referred to with the general term “grounding wire.” It does not have any sort of protective coating, however, the lack of insulation allows bare copper to have the best conductive properties. As a base, the wire contained within acts as a ground.
Silver bonding wires have been developed as a perfect combination of significant cost reduction compared to gold and required bonding features for sensitive devices. They achieve good reliability and excellent bondability. With a diameter up to a size of 0.6 mils / 15 microns they are suitable for fine structures with an ultra-fine pitch.
A wire harness, also commonly referred to as a wiring harness, is an exterior sheath used to cover some types of electronic wires. Generally, wiring harnesses are made of thermoplastic or thermoset materials that can help protect the cables from the environment.
High temperature wire is often defined as a wire with a temperature rating of 125°C or higher, although high-temperature can also refer to temperature ratings as low as 90°C. High-temperature cables can either be single-conductor or multiconductor.
Silicone rubber wire is a wire where silicone (a type of rubber) is used as the insulator around the wire. Silicone wire is well known for its flexibility and heat resistance and is highly recommended within extreme temperature environments. These wires usually have a temperature resistance up to + 250°C.
PVC wire is wire with an insulating jacket made from polyvinyl chloride, a soft plastic. It is usually used for low-voltage applications where the wire will be enclosed inside equipment or a raceway. It produces toxic gases when it burns and so is not run exposed in walls or ceilings.

A dining chair is part of a dining room furniture set. A set of dining room chairs, often six or more, is arranged around a dining room table. A dining chair is a small chair with a frame that is not upholstered. It has a solid frame and it may or may not have arms. The seat and back may or may not be upholstered.
Accent chairs are chairs that are placed strategically in a room to provide additional seating. There are two approaches to making use of an accent chair. One approach is to place the chair in a position that complements or accents the colors and textures of larger pieces, such as a sofa. A second approach to the use of this type of chair is to create a secondary seating area within the room.
Ergonomic accent chair is brimming with mid-century flair. This chair accents a modern living room setup and creates a comforting retreat - as the name suggests. Its inviting curved contours, organic shapes, soft padded upholstery and a footstool supports countless seating positions.
A swivel accent chair is one in which may rotate the seat about a central point to face in a new direction without moving the legs. Swivel chairs with wheels on the base allow users to move the chair around their workspace without getting up. This style is commonly found in modern offices and is also known as office chairs.
Barstools are a type of tall stool, often with a foot rest to support the feet. The height and narrowness of bar stools makes them suitable for use at bars and high tables in pubs or bars. There are many different types, construction materials and models. Bar stools are often made of wood or metal. There are bar stools with and without armrests, backs, and padding or upholstery on the seat surface. Bar stools can range from basic wooden designs to more complex ones with adjustable height. Extra tall and extra short are common features, as well as indoor bar stools and outdoor bar stools. Some bar stools have backs, while most do not.
Leather barstool uses a good stool fabric, leather. The material is hard to rip, tear, or put holes into it. Also, it is easy to clean and can resist stains. An leather bar stool is a protean seating option that can add some color and character to any living space or commercial establishment. It looks classy, is comfortable and can also be your go-to seating for impromptu meal preps on the kitchen island.
Fabric barstool has backs. And when sitting on it, you fell comfortable, warm and soft. Also, it is decorative, easy to clean, resists stains, and is hard to tear or rip. Plus, it is also waterproof.
Metal frame barstool is made of quality metal with classic textured melamine veneer. The mixed materials combine the notably rustic with modern style. Barstool is ideal for a kitchen eating area, living room, party room, country pub, or basement bar. It's easy to match for most themes. This bar stool is rustic in feel with modern appeal with a wrap-around foot rest for comfort.
An ottoman is a form of couch that usually has a head but no back, although sometimes it has neither. It may have square or semicircular ends, and as a rule it is what upholsterers call "overstuffed", meaning no wood is visible. It may be used as a stool, footstool or as an alternative to a sofa. Ottomans are often sold as coordinating furniture with armchairs or gliders.
A bench (furniture) is a type of chair that commonly can hold 1-5 people at one time although a bench can be made to support more people if the area has the demand. Most benches are in public areas such as: Parks, Airports, Subways, and on large city roads.

Drills bits are cutting tools used to remove material to create holes, almost always of circular cross-section. Drills come in many sizes and shapes and can create different kinds of holes in many different materials. In order to create holes drill bits are usually attached to a drill, which powers them to cut through the workpiece, typically by rotation. The drill will grasp the upper end of a bit called the shank in the chuck.
SDS plus drill bits are used for drilling into hard materials such as brick and concrete with minimal effort. The SDS part refers to the shank type, which has two sets of grooves that snap into the chuck making it more secure and allowing the bit to slide up and down giving you the hammer action.These bits are interchangeable with SDS drill bits and are available in a variety of sizes. As they are thinner, they are ideal for smaller holes.
SDS max drill bit is intended to drill larger holes and work in more extreme conditions. It is a drill bit that offers higher speed and drills with more power. It is therefore ideal for drilling on hard surfaces and for drilling larger holes.These bits have three open grooves, with a locking segment attached to the grooves rather than locking balls. They are made for bigger hammer drills and make bigger holes. SDS Max chisels are also available that can be used for chipping, digging, chiselling, and other heavy-duty work.
Square drill bits are also called mortise bits, and the best ones fit universally in most mortising machines and drill presses that have hammering functions.
An SDS hex drill bit is, as its name suggests, a bit designed to be used with an SDS rotary hammer drill. The dual action of rotation coupled with proper hammering makes chiseling and drilling through hard materials much easier than with a standard drill bit. An SDS bit is quite different than a standard bit and is composed of five parts.
A chisel is a tool with a characteristically shaped cutting edge (such that wood chisels have lent part of their name to a particular grind) of blade on its end, for carving or cutting a hard material such as wood, stone, or metal by hand, struck with a mallet, or mechanical power.The handle and blade of some types of chisel are made of metal or of wood with a sharp edge in it.
SDS plus chisel delivers clean and fast removal of wall and floor tiles. Self-sharpening spade body retains uniform thickness throughout its lifetime for consistently high removal rates. Angled cutting edge and self-sharpening design are for a long life and a 30%-higher material removal rate.
SDS max chisels are made from high grade, forged steel, providing up to 20% longer life. These chisels are specifically designed for SDS-Max rotary hammers and should be used in hammer only mode.
A hole saw (also styled holesaw), also known as a hole cutter, is a saw blade of annular (ring) shape, whose annular kerf creates a hole in the workpiece without having to cut up the core material. It is used in a drill. Hole saws typically have a pilot drill bit (arbor) at their center to keep the saw teeth from walking. The fact that a hole saw creates the hole without needing to cut up the core often makes it preferable to twist drills or spade drills for relatively large holes (especially those larger than 25 millimetres (1.0 inch)). The same hole can be made faster and using less power.
A glass drill bit is typically used with an electric drill to create holes in glass. It may also be used for tile, ceramics and similar materials. The bit is coated with diamond pieces that act like sandpaper to rub holes in the material being drilled without cracking or breakage. The glass bit is smooth, straight and has a rough texture.The glass drill bit doesn’t have any flutes, because when a hole is drilled in glass the excess material is fine enough that it turns to dust rather than shavings that must be removed from the hole.

A wood cutting machine is equipment used to change the size and shape of semifinished wood goods and parts by manually or mechanically cutting the wood and removing the shavings (lathes). Many woodcutting machine tools can cut at speeds of up to 60–100 m/sec and feed at rates of 100–180 m/min. The most common types are saws, shapers, and drills.
A table panel saw is any type of sawing machine that cuts sheets into sized parts. Panel saws can be vertical or horizontal. Typically, vertical saws take up less floor space. Panel saws can have one main saw blade or a scoring along with the main saw blade. Scoring is used to create a groove, especially in double side laminate before the main saw rips the piece in two, to avoid chipping. The scoring saw rotates in an opposite direction, as the main saw to avoid chipping.
A wood sanding machine is a power tool used to smooth surfaces by abrasion with sandpaper. Sanders have the means to attach the sandpaper and a mechanism to move it rapidly contained within a housing with means to hand-hold it or fix it to a workbench. There are different types of wood sanding machines including belt sander, orbital sander, disc sander, polish sander, brush sander, electric sander or vibration sander.
Wire brush machine is an industrial strength crevice cleaner. It's ideal for the removal of debris and weeds from asphalt and concrete cracks. The wire brush is primarily an abrasive implement, used for cleaning rust and removing paint. It is also used to clean surfaces and to create a better conductive area for attaching electrical connections, such as those between car battery posts and their connectors, should they accumulate a build-up of grime and dirt.
Also known as a forming press, a wood press machine is a tool used in the manufacturing industry to deform a workpiece under high pressure. There are different types of wood machines presses, including press brakes, punch presses, shop presses and more. While the exact mechanics vary depending on the type of machine press, most machine presses work by pressing a plate or die onto or against a workpiece. Once the workpiece is positioned underneath the machine press’s plate or die, the tool setter activates the machine press. Using hydraulic pressure, the machine press pushes the plate or die against the surface of the workpiece, which causes the workpiece’s shape to deform.
Profile wrapping machine is specially used to coat PVC, PP film, lacquer paper, etc. on the surface of wood, bamboo decorative strips, aluminum, plastics and other materials. Using high-standard coating, it can cover various angles, arcs, concave and convex surfaces, pressure grooves, curling, etc. Suitable for building materials, furniture, desktops, doors and windows, decorative strips or related professional manufacturers. It can perfectly cover the surface of products with complex shapes.
The surface planer (sometimes known as a 'Jointer') is used for planing one side and one face of solid timber straight and square to each other. A surface planer is designed with two tables, an infeed table and an outfeed table with a cutterblock set between them. The basic setup of a surface planer includes a housing that encases a set of blades located in the middle and a couple of rollers in front and behind them. As a board is passed through the machine, the first set of rollers grabs it then passes it through the blades, which skims off material from the board.
Four sides moulder moulds the shape by cutting away the excess wood needed to reveal the profile. This process happens on all four sides of the board in one pass through the machine.
A dust collector, sometimes called a dust extractor, is an indispensable cleaning machine for any woodworking enthusiast. The dust collector is a tool that collects the wood byproducts produced by power tools. Whether these are wood chips, wood shavings, or dust, it keeps the area where you’re working clean. The dust is stored in a container or plastic bag until it’s emptied out.
Multi rip saw machine is a new designed woodsaw machine, cut to boards from log directly, which is widely used in woodbased panel. Machine type for edging, lengthwise cutting or long side grooving of planks, boards and panel material that is equipped with several saw blades or grooving tools mounted side by side on a sawing spindle.